Sale!
Industrial Diesel Fan Heater / Industrial Heating Cooling Ventilation Distribution Fans Warehouse Australia / Fanmaster

INDUSTRIAL DIESEL FAN HEATER 20KW SERIES 3 – IDH3-20

$489.00

The Fanmaster IDH3-20 (Series 3) Industrial Diesel Fan Heater is a 20KW direct fired heater that is designed to provide an instant effective and reliable source of heat to a wide range of industrial, agricultural and commercial users.

The IDH3-20 heater can run on diesel or kerosene fuel, it comes complete with an integrated fuel tank, durable wheels and heavy duty handle for mobility. The top cover design allows for easy access for maintenance and servicing. This unit comes with a maintenance kit which includes a spare fuel nozzle, fuel line & fuel filter.

The digital display shows room (ambient) and setting temperature which is controlled by an adjustable thermostat where you can set a predetermined temperature. When the air temperature reaches the set temperature the heater will shut off and once the ambient temperature drops below the set temperature the heater will automatically turn back on.

Ideally suited for warming well ventilated warehouses and large workshop areas, construction & building sites and drying applications.

Warranty:
Purchased pre 2023 – 1 Year
Purchased 2023 onwards – 2 Year

Part No. IDH3-20
Heat Output (KW/BTU) 20 / 68,240
Heating Area (m2) up to 200
Air Flow (L/s) 153
Power (W) 230
Voltage 220~240V /50Hz
Current (A) 1.2
Plug Connection 3 Pin 10A
Fuel Type Diesel or Kerosene
Tank Size (L) 19
Consumptuon (L/Hr) 1.65
Continuous run time (Hr) 11
Pressure (Bar) 0.32
Fan Speed 1
Heat Settings 1
Weight (KG) 14.9 / 17
Dimensions (mm) W*D*H 752*305*430
Packaging (mm) W*D*H 795*370*440
Cable Length (m) 1.3
Fuel Cut Off Protection Yes
Malfunction Detection Light Built in
Part No. Description RRP
SP-IDH3-FN1 FUEL NOZZLE TO SUIT IDH3-20 $35.00
SP-IDH3-FF1 FUEL FILTER WITH O RING TO SUIT IDH3-20 $25.00
SP-IDH3-FFT FUEL FILTER INLET TANK TO SUIT ALL IDH3 $16.00
SP-IDH3-FL FUEL LINE TO SUIT ALL IDH3 $25.00
SP-IDH3-FB1 FAN BLADE TO SUIT IDH3-20 $30.00
SP-IDH3-FM1 FAN MOTOR TO SUIT IDH3-20 + IDH3-30 $299.00
SP-IDH3-PC1 PHOTOCELL TO SUIT IDH3-20 + IDH3-30 $20.00
SP-IDH3-CB1 CIRCUIT BOARD TO SUIT IDH3-20 + IDH3-30 $70.00
SP-IDH3-TR1 THERMOSTAT RESET BUTTON TO SUIT IDH3-20 + IDH3-30 $20.00
SP-IDH3-IGN IGNITION NEEDLES TO SUIT ALL IDH3 $20.00
SP-IDH3-IGT IGNITION TRANSFORMER TO SUIT ALL IDH3 $90.00
PUMP ASSEMBLY INC PUMP CORE BODY $
SP-IDH3-PF PUMP FILTER TO SUIT ALL IDH3 $10.00
  • Check your diesel fuel is clean
  • Adequate ventilation is required, try and position the heater near a roller door so its drawing fresh air in
  • In colder regions you may have more issues with diesel fuel solidifying causing blockages in fuel lines and nozzles, blending a mixture of Kerosene essentially helps thin out the fuel creating less blockage
  • Try not to leave your heater out in the cold after use, cover it with a tarp or blanket which will help melt the fuel lines stopping any blockages
  • After winter try not to leave any diesel in the tank, use it all up and drain out of the tank and cover it with a tarp or blanket and store it away
  • Maintenance is key, ensure your maintaining your heater a minimum twice a year – check, clean or replace fuel nozzle, fuel line, fuel filter, air line & air pump.

The Fanmaster IDH3-20 (Series 3) Industrial Diesel Fan Heater is a 20KW direct fired heater that is designed to provide an instant effective and reliable source of heat to a wide range of industrial, agricultural and commercial users.

The IDH3-20 heater can run on diesel or kerosene fuel, it comes complete with an integrated fuel tank, durable wheels and heavy duty handle for mobility. The top cover design allows for easy access for maintenance and servicing. This unit comes with a maintenance kit which includes a spare fuel nozzle, fuel line & fuel filter.

The digital display shows room (ambient) and setting temperature which is controlled by an adjustable thermostat where you can set a predetermined temperature. When the air temperature reaches the set temperature the heater will shut off and once the ambient temperature drops below the set temperature the heater will automatically turn back on.

Ideally suited for warming well ventilated warehouses and large workshop areas, construction & building sites and drying applications.

Warranty:
Purchased pre 2023 – 1 Year
Purchased 2023 onwards – 2 Year

Weight 19 kg

Reviews

There are no reviews yet.

  • Hidden
  • This field is for validation purposes and should be left unchanged.