Fanmaster Fan Maintenance
Your fan must be cleaned periodically to keep it clean and attractive.
1. Remove plug from power point and make sure blade has stopped spinning.2. Remove safety nut and bolt on bottom of guard.
3. Unclip the 5 locating brackets and remove front guard.
4. Loosen grub screw on blade and remove blade.
5. Remove the 4 phillips head screws on the front of the motor to remove rear guard.
6. Using a mild detergent wipe over the blade and guards.
7. Do not wet motor but use a slightly damp cloth to remove dust.
8. Refix the rear guard with the 4 phillips head screws.
9. Refit blade and check it is properly fixed to the motor shaft.
10. Refit front guard ,clip down the 5 locating brackets and refit safety nut and bolt.
11. Plug into power point and test.
12. Enjoy your fan.
